Initial Inspection and Diagnostic Overview

1. Verify the customer's original concern by operating the active restraint system to duplicate the condition.
2. Inspect to determine if any of the following mechanical or electrical concerns apply:

VISUAL INSPECTION CHART

Mechanical
^ Inspect the safety belt webbing for integrity.

Electrical
^ Open fuse.
^ Bare, broken or disconnected wire.
^ Connector not tightly engaged.
^ Safety belt warning indicator lamp burned out or broken.

3. If the inspection reveals an obvious concern(s) that can be readily identified, repair the concern(s) as required.
4. If the concern remains after the inspection, determine the symptom and go to the Symptom Chart. Symptom Related Diagnostic Procedures