Instrument Panel, Gauges and Warning Indicators: Service and Repair

REMOVAL
1. Disconnect the battery ground cable. Refer to Battery.







2. Remove the center A/C register finish panel.
^ Disconnect the electrical connector.







3. Remove the message center switch.
1 Remove the screws.
2 Remove the message center switch.
^ Install a new bulb if necessary.


INSTALLATION

1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and then reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.