Classic to Capture Messages From A Particular Module

USING THE NGS CLASSIC TO CAPTURE MESSAGES FROM A PARTICULAR MODULE

If needed, the NGS Classic may be manipulated to capture messages that are sent from a particular module (source) or function. To setup the FLTR feature to capture only messages sent by a module use the following procedure:

1. Enter the SETUP menu and press the SRC key.

2. Use the scroll to select the desired module and press Trigger.

3. Press the Cancel button to return to the monitor screen.

4. Press the FLTR button to toggle the FLTR display in the upper right screen to on.

5. The NGS Classic will now display only messages sent by the module that you specified in the SETUP menu.