Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Flow Meter/Sensor: Service and Repair

REMOVAL

CAUTION: The mass airflow sensor hot wire sensing element and housing are calibrated as a unit and must be repaired as a complete assembly. Do not damage the sensing element (internal to housing) or possible failure of the MAF sensor may occur.

1. Disconnect the battery ground cable.







2. Disconnect the Mass Airflow (MAF) sensor electrical connector.







3. Loosen the screws on the air cleaner outlet tube clamp.







4. Remove the air cleaner housing cover.
1 Release the cover clips.
2 Remove the cover.







5. Remove the bolts and the MAF sensor.
^ Discard the gasket.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: A new gasket must be installed.