Removal and Replacement

TRIM PANEL-QUARTER

Special Tool(s):

Special Tool(s)

Removal
1. Remove the liftgate door opening weather seal.







2. Remove the liftgate scuff plate.
3. If equipped, remove the third row seat.







4. Remove the rear header garnish trim panel.







5. Remove the rear door scuff plates (13228).
6. Fold down the second row seat.







7. Remove the cross car scuff plate.







8. Remove the second row safety belt guide nut.
1 Lift the cover.
2 Remove the nut.







9. Remove the second row safety belt lower nut.







10. NOTE: Remove the upper attachments followed by the lower attachment and the lower rear hook.

Remove the C-pillar trim panel.
- Remove the rear door opening weather seal.
- Remove the C-pillar trim panel.







11. If equipped, remove the third row safety belt guide.
1 Lift the cover.
2 Use Safety Belt Bolt Bit to remove the safety belt guide bolt.
3 Remove the third row safety belt guide.







12. NOTE: Remove the lower hook attached to the quarter trim panel, followed by the top attachment, and then the lower rear attachment.

Remove the D-pillar trim panel.
- Remove the liftgate door opening weather seal.







13. Remove the quarter trim panel.
1 Remove the screws and pin-type retainer.
2 Remove the quarter trim panel.

Installation












1. To install, reverse the removal procedure.