Crankshaft Pulley
Install the bolt and washer. Tighten the bolt in four stages:
^ Stage 1: Tighten to 90 Nm (66 ft. lbs.).
^ Stage 2: Loosen one full turn.
^ Stage 3: Tighten to 50 Nm (37 ft. lbs.).
^ Stage 4: Tighten an additional 85-95 degrees.
Install the bolt and washer. Tighten the bolt in four stages:
^ Stage 1: Tighten to 90 Nm (66 ft. lbs.).
^ Stage 2: Loosen one full turn.
^ Stage 3: Tighten to 50 Nm (37 ft. lbs.).
^ Stage 4: Tighten an additional 85-95 degrees.