Vehicles With Rear Heated Seats

REMOVAL
1. Remove the rear seat cushion.







2. Label and disconnect the electrical connector.







3. Remove the two nuts and the rear seat backrest.

INSTALLATION
1. To install,reverse the removal procedure.

WARNING: THE RETAINING WIRES IN THE REAR SEAT CUSHION PAD AND FRAME AND THE REAR SEAT BACKREST PAD AND FRAME BACK MUST BE FULLY SEATED IN THE RETAINER BRACKETS TO PREVENT THE SEAT BACKREST AND SEAT CUSHION FROM SLIDING FORWARD IN THE EVENT OF A COLLISION. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN PERSONAL INJURY.

2. Check the restraint system for correct operation.