Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 2001 >> Town Car V8-4.6L VIN W >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> Cylinder Block Assembly >> Connecting Rod, Engine >> Connecting Rod Bolt
Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Connecting Rod Bolt

CAUTION: The rod cap installation must keep the same orientation as marked during disassembly.

NOTE: The connecting rod caps are of the cracked design and must mate with the connecting rod ends. Excessive bearing clearance will result if not mated correctly.

Position the lower bearing and connecting rod, and install the new bolts loosely.





Tighten the bolts in two stages, in the sequence shown.
- Stage 1: Tighten to 40 - 45 Nm (30 - 33 ft. lbs.).
- Stage 2: Rotate an additional 90 - 120 degrees.
pro multis · About Operation CHARM