Ball Joint Inspection

Ball Joint Inspection

NOTE: The front suspension is shown in the following procedures. The inspection of the rear suspension upper ball joint is similar.

1. Raise and support the vehicle.





2. Prior to performing any inspection of the ball joints, inspect the front wheel bearings for looseness.





3. While an assistant pulls and pushes the top and bottom of the tire, observe the relative movement between the ball joint and the front suspension lower arm. Any movement indicates a worn or damaged ball joint. Install a new wheel knuckle as necessary.
4. While an assistant pulls and pushes the top and bottom of the tire, observe the relative movement between the ball joint and the front suspension upper arm or rear suspension upper arm. Any movement indicates a worn or damaged ball joint. Install a new front suspension upper arm or rear suspension upper arm as necessary.