Auto-Lock Enable/Disable - Using the Ignition Switch

AUTO-LOCK ENABLE/DISABLE - USING THE IGNITION SWITCH

Another way to turn the auto-lock off and on is by following this series of steps:
1. Close all the doors.
2. Confirm that the key is OFF.
3. Turn the key from OFF to ON.

4. NOTE: Steps 4 through 7 must be carried out within 30 seconds.

Press the power door lock UNLOCK button three times.

5. Turn the key from ON to OFF.
6. Press the power door lock UNLOCK button three times.
7. Turn the key from OFF to ON.
8. Verify that the horn chirps. This indicates the enable/disable mode is ready to receive program changes.
9. Press the power door lock UNLOCK one time then press LOCK.
10. Verify that the horn chirps one time, indicating the auto-lock/relock feature is disabled. If one chirp is heard, followed by a longer sound of the horn, the auto-lock/relock feature is enabled. Return to Step 9.
11. Turn the key to the OFF position to exit the enable/disable mode. If the auto-lock status has changed, the horn chirps once. If the status has not changed, no horn chirp is heard. Return to Step 1.