Ignition Coil: Service and Repair

IGNITION COIL-ON-PLUG







Exploded Views

Removal and Installation
1. Disconnect the negative battery cable.
2. Remove the ignition coil cover bolts.
- To install, tighten to 10 Nm (89 lb-in).

3. Remove the ignition coil covers.
4. Disconnect the 8 ignition coil electrical connectors.
5. Remove the 8 ignition coils from the spark plugs.
- Apply silicone dielectric compound to the inside of the ignition coil boots when installing.

6. To install, reverse the removal procedure.