Air Cleaner Housing: Service and Repair

AIR CLEANER







Exploded View

Removal and Installation
1. Disconnect the battery ground cable.
2. Disconnect the mass air flow (MAF) sensor electrical connector.
3. Release the clamps and remove the air cleaner tray.
4. Reach into the opening of the air cleaner assembly and depress the locking tabs on the air cleaner intake pipe and resonator to release the air cleaner intake pipe and resonator from the air cleaner assembly.
5. Disconnect the crankcase ventilation tube.
6. Remove the 4 bolts and the air cleaner.
- To install, tighten to 10 Nm (89 lb-in).

7. To install, reverse the removal procedure.