Speaker Walk-Around Test

SPEAKER WALK-AROUND TEST

NOTE: To enter the speaker walk-around test or audio unit self-diagnostic mode, the audio unit must be turned on and in radio tuner mode (AM/FM).

1. To enter the speaker walk-around test, simultaneously press and hold the audio unit preset buttons 3 and 6 for approximately 3 seconds, then release.
2. The speaker walk-around test applies sound to each speaker for 1 to 2 seconds. Each speaker is tested and displayed on the audio unit in the following sequence: RF, LF, LR, RR.
3. The speaker walk-around test automatically continues and tests for the operation of the AM/FM antenna. If the antenna is inoperative, NOT FOUND will be displayed. If the vehicle is not equipped with CD/DJ, or if the CD/DJ is not responding, NO DJ will be displayed.