Rear Seat Backrest - Third Row, 60 Percent
REAR SEAT BACKREST - THIRD ROW, 60 PERCENTRemoval and Installation
All seats
1. Remove the third row 60 percent seat.
2. Remove the 2 screws and the inboard and outboard slide bracket covers.
3. Release the backrest trim cover lower and inboard J-clips.
Manual fold seats
4. Remove the manual seat cable.
1 Pinch the cable end and remove the cable from retainer.
2 Release the cable end hook from the retaining hole.
All seats
5. Remove the outboard slide bracket-to-backrest frame and outboard slide bracket-to-outboard latch nuts.
- To install, tighten to 15 Nm (11 lb-ft).
6. Remove the inboard slide bracket-to-backrest frame and inboard slide bracket-to-outboard latch nuts.
- To install, tighten to 15 Nm (11 lb-ft).
7. Remove the backrest from the cushion.
8. To install, reverse the removal procedure.