Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 2006 >> Navigator 2WD V8-5.4L VIN 5 >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Engine Control Module >> Service and Repair

Engine Control Module: Service and Repair

POWERTRAIN CONTROL MODULE (PCM)


Special Tool(s):






Special Tool(s)







Removal and Installation

1. NOTE: Refer to Computers and Control Systems for correct worldwide diagnostic system (WDS) hook-up procedure.

If servicing the powertrain control module (PCM), connect the diagnostic tool to the vehicle. Allow the diagnostic tool to identify the vehicle and obtain configuration data.
- All programmable module information will automatically be retrieved by the WDS.

2. Disconnect the battery ground cable.
3. Disconnect the PCM electrical connectors.
4. Remove the 4 bolts and the PCM.
- To install, tighten to 7 Nm (62 lb-in).

5. If servicing the PCM bracket, remove the 3 bolts and the PCM bracket.
- To install, tighten to 10 Nm (89 lb-in).

6. To install, reverse the removal procedure.
pro multis · About Operation CHARM