Suspension Control Module: Service and Repair

Air Suspension Control Module





Removal and Installation

1. CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

Disconnect the battery ground cable.





2. NOTE: The air suspension control module is mounted to the lower left side of the dash above the parking brake control.

Disconnect the 2 air suspension control module electrical connectors.
3. Pull back the dash padding to expose the 2 module bracket nuts.
4. Remove the air suspension control module nuts and the air suspension control module.
^ To install, tighten to 8 Nm (71 inch lbs.).

5. NOTE: The air suspension control module is calibrated with information from the ride height sensors. A new or exchanged air suspension control module requires that the ride height adjustment calibration and pneumatic test be carried out.