Brake Switch (Cruise Control): Service and Repair

SPEED CONTROL DEACTIVATOR SWITCH







Removal







1. NOTE: The speed control deactivator switch can only be adjusted once. If further adjusting is necessary, install a new switch.

Remove the speed control deactivator switch.
1 Disconnect the electrical connector.
2 Rotate the deactivator switch counterclockwise 45 degrees and remove the switch.

Installation

All vehicles







1. Release the plunger lock (if equipped).
- Turn the lock knob counterclockwise until the first click is felt.

2. Fully apply the brake pedal







3. Install the speed control deactivator switch.
1 Position the deactivator switch in the bracket and rotate it clockwise 45 degrees.
2 Connect the electrical connector.

Vehicles equipped with a locking tab

4. NOTE: There should be an extra click heard when tugging on the brake pedal.

Slowly release the brake pedal and tug it moderately once the pedal reaches the rest position.