Cable and Bracket Adjustment Floor Shift
Cable and Bracket Adjustment Floor Shift1. With the vehicle in NEUTRAL, position the vehicle on a hoist.
2. Place the gearshift lever in the (D) position.
3. Disconnect the transmission shift cable from the manual control lever.
4. NOTE: Make sure the cable moves freely.
Unlock the lock tab on the transmission shift cable.
5. Place the manual control lever in the (D) position.
^ Place the manual control lever in the 1st gear position.
^ Move the manual control lever 3 detents to the (D) position.
6. NOTE: Apply pressure to the selector lever cable end while connecting it to the manual lever to make sure the selector lever has not moved out of the (D) position.
Connect the transmission shift cable to the manual control lever.
7. Lock the transmission shift cable lock tab.
8. Carefully move the manual control lever from detent to detent and compare with transmission settings. Verify that the vehicle will start in PARK or NEUTRAL and backup lamps illuminate in REVERSE. If not, Steps 1 through 5 must be repeated.
^ Readjust if necessary.
9. Vehicles equipped with a 4R70E/4R75E transmission, carry out the digital transmission range (TR) sensor adjustment.