Test I: All The Stoplamps Are Inoperative
PINPOINT TEST I: ALL THE STOPLAMPS ARE INOPERATIVENormal Operation
For all vehicles, the stoplamp switch is supplied voltage through circuit SBP04 (GN/RD) from the smart junction box (SJB). When the brake pedal is applied, the stoplamp switch routes voltage to the SJB through circuit CCB08 (VT/WH).
For Fusion, the SJB provides voltage to the rear stoplamps.
For Milan and MKZ, the voltage is routed through the SJB to all the stoplamps through circuit CLS17 (YE/GY).
This pinpoint test is intended to diagnose the following:
- Fuse
- Wiring, terminals or connectors
- Stoplamp switch
- SJB