In-Vehicle Temperature and Humidity Sensor

IN-VEHICLE TEMPERATURE AND HUMIDITY SENSOR







Removal and Installation
1. Remove the 3 lower steering column cover screws and the lower steering column cover.
- Disconnect the electrical connector.

2. Remove the 4 steering column reinforcement bolts and position the steering column reinforcement aside.
- To install, tighten to 9 Nm (80 lb-in).

3. Remove the in-vehicle temperature and humidity sensor.
1 Detach the in-vehicle temperature and humidity sensor from the instrument panel finish panel.
2 Disconnect the aspirator hose.
3 Disconnect the in-vehicle temperature and humidity sensor electrical connector.

4. To install, reverse the removal procedure.