Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 2010 >> MKS AWD V6-3.7L >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Ignition Switch Lock Cylinder >> Service and Repair >> Ignition Lock Cylinder
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Lock Cylinder




Ignition Lock Cylinder









Removal and Installation

NOTE: For non-functional ignition lock cylinders, the ignition lock cylinder housing has to be replaced. For additional information, refer to Ignition Lock Cylinder Housing.

1. Remove the steering column cover. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.

2. Remove the RH instrument panel finish moulding. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.

3. Gently pull to unclip and remove the ignition lock cylinder bezel.

4. Insert the ignition key and turn it to the ACC position.

5. Using a suitable tool, press the release pin on the top side of the ignition lock cylinder housing and remove the ignition lock cylinder.





6. If a new lock cylinder with keys is replaced, the new Passive Anti-Theft System (PATS) keys must be programmed. For additional information, refer to Key Programming Using Diagnostic Equipment - Integrated Keyhead Transmitter (IKT) in Antitheft and Alarm Systems. Integrated Keyhead Transmitter (IKT)

7. To install, reverse the removal procedure.

pro multis · About Operation CHARM