Operation CHARM: Car repair manuals for everyone.
Home >> Lincoln >> 2010 >> MKT AWD V6-3.5L Turbo >> Repair and Diagnosis >> Accessories and Optional Equipment >> Cellular Phone >> Communications Control Module >> Service and Repair >> Removal and Replacement >> Audio Digital Signal Processing (DSP) Module
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Audio Digital Signal Processing (DSP) Module




Audio Digital Signal Processing (DSP) Module









Removal and Installation

1. NOTE: Module configuration is required when a new audio Digital Signal Processing (DSP) module is being installed.

Upload the audio DSP module configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in Information Bus. Programmable Module Installation (PMI)

2. Remove the RH quarter trim panel.

3. Disconnect the audio Digital Signal Processing (DSP) module electrical connectors.

4. Remove the 3 screws and the audio DSP module.
- To install, tighten to 7 Nm (62 lb-in).

5. To install, reverse the removal procedure.
- Download the configuration information from the scan tool. For additional information, refer to PMI in Information Bus. Programmable Module Installation (PMI)

pro multis · About Operation CHARM