Active Park Assist

Active Park Assist

The active park assist system consists of the following:

- Active park assist switch (located in the center console on the selector lever trim panel)
- Two long range ultrasonic active park assist sensors (located in the sides of the front bumper cover)
- Parking Aid Module (PAM) (located in the passenger C-pillar, behind the trim panel)
- Four ultrasonic parking aid sensors (located in the rear bumper cover)
- Rear parking aid speaker (mounted to the PAM)
- Instrument Panel Cluster (IPC)
- Power Steering Control Module (PSCM) (part of the Electronic Power Assist Steering (EPAS) system located on the steering gear assembly)
- Steering Angle Sensor Module (SASM) (mounted to the steering column)
- ABS module
- PCM
- HVAC module
- Multifunction switch

The active park assist system is a supplementary parking aid that assists the operator in detecting an available parallel parking space and automatically steering the vehicle into the space while the operator controls the accelerator, gearshift and brakes.

The system visually and/or audibly instructs the operator to park the vehicle through messages in the IPC message center and/or warning chimes. The parking aid system is utilized for detecting the space to the rear of the vehicle when backing up.