Dual Climate Controlled Seat Module (DCSM)

Dual Climate Controlled Seat Module (DCSM)

Removal and Installation

NOTE: For component identification and locations, refer to Seat - Exploded View, Front Seat - Exploded View, Front.

1. When installing a new Dual Climate Controlled Seat Module (DCSM), carry out the appropriate steps in Programmable Module Installation (PMI). For additional information, refer to Information Bus. Programmable Module Installation (PMI)

2. Position the front passenger seat all the way back and up to access the DCSM.

3. Remove the DCSM in the following sequence.
- Remove the screws.

- Release the locking wedges on the 2 DCSM electrical connectors.

- Disconnect the electrical connectors.

- Remove the DCSM.





4. To install, reverse the removal procedure.

5. If a new DCSM has been installed, carry out the appropriate steps in Programmable Module Installation (PMI). For additional information, refer to Information Bus. Programmable Module Installation (PMI)