Anti-Theft - Passive Anti-Theft System (PATS) - Passive Start Antenna - Rear

Passive Start Antenna - Rear









Removal and Installation

1. Remove the liftgate scuff plate trim panel. For additional information, refer to Interior Trim - Exploded View in Interior Trim and Ornamentation Interior Trim - Exploded View.

2. Pull the red lock tab outward and disconnect the center passive start antenna electrical connector.

3. Using a suitable tool (such as needle nose pliers), release the rear passive start antenna from the 2 push pins and remove the rear passive start antenna.

4. To install, reverse the removal procedure.