Key Programming Switch State Control - Intelligent Access (IA)

Key Programming Switch State Control - Intelligent Access (IA)





NOTE: The spare key programming switch is a programmable switch which provides the capability to enable/disable the normal customer spare key programming procedure detailed in the Owner's Literature. It must read ENABLE if more than 2 keys need to be programmed into the Remote Function Actuator (RFA) module using the Key Programming Using Two Programmed Keys - Intelligent Access (IA) Key Programming Using Two Programmed Keys - Intelligent Access (IA). This programmable switch is provided as a convenience for rental company fleets or other fleet purchasers who may not want the spare key programming procedure available to the vehicle driver.

NOTE: If the SPAREKEY PID reads ENABLE, up to 4 keys total can be programmed into the RFA module using Key Programming Using Two Programmed Keys - Intelligent Access (IA) Key Programming Using Two Programmed Keys - Intelligent Access (IA). If the SPAREKEY PID reads DISABLED, the Key Programming Using Two Programmed Keys - Intelligent Access (IA) Key Programming Using Two Programmed Keys - Intelligent Access (IA) procedure cannot function. This switch is set to ENABLE when the vehicle is built. This PID does not affect the Key Programming Using Diagnostic Equipment - Intelligent Access (IA) Key Programming Using Diagnostic Equipment - Intelligent Access (IA) procedure.

1. From the scan tool, ENTER SECURITY ACCESS. For additional information, refer to Anti-Theft Security Access - Intelligent Access (IA) Component Tests and General Diagnostics.

2. From the scan tool menu select: "Customer Spare Key Programming Enable" (or "Customer Spare Key Programming Disable") and follow the Integrated Diagnostic System (IDS) on-screen instructions.
- "Customer Spare Key Programming Enable" - the spare key programming procedure is accessible.

- "Customer Spare Key Programming Disable" - the spare key programming procedure is not accessible.