Seat Backrest Heater Mat - Second Row, 60 Percent

Seat Backrest Heater Mat - Second Row, 60 Percent

Removal

NOTICE: The heater mat is not designed to be separated from the foam pad. Doing so will damage the foam pad. Install a new foam pad and heater mat. Failure to follow this instruction can result in seat component damage and system failure.

NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row Seat - Exploded View, Second Row.

1. Remove the backrest trim cover. For additional information, refer to Seat Backrest Cover - Second Row, 60 Percent Seat Backrest Cover - Second Row, 60 Percent.

2. Lift the backrest foam pad away from the backrest frame and disconnect the backrest heater mat. Discard the backrest foam pad and heater mat.





Installation

1. Install a new backrest heater mat onto a new backrest foam pad.

1. Position the heater mat wire harness through the backrest foam pad.

2. Position the backrest heater mat onto the backrest foam pad and tuck the heater mat into the foam pad trenches.
- Make sure the openings in the backrest heater mat align to the wires in the backrest foam pad.

3. Make sure the backrest heater mat stays in place, remove the paper strips from under the backrest heater mat and adhere to the backrest foam pad, laying it flat with no wrinkles.





2. Position the backrest foam pad to the backrest frame. Connect the backrest heater mat electrical connector.

3. Install the backrest trim cover. For additional information, refer to Seat Backrest Cover - Second Row, 60 Percent Seat Backrest Cover - Second Row, 60 Percent.