Seat Cushion Thermo-Electric Device - Front Row

Seat Cushion Thermo-Electric Device - Front Row

Removal

NOTE: For component identification and locations, refer to Seat - Exploded View, Front Seat - Exploded View, Front.

1. Remove the seat. For additional information, refer to Seat - Front Seat - Front.

2. From under the seat, separate the cushion Thermo-Electric Device (TED).

1. Disconnect the electrical connector.

2. Disengage the 2 rear retainers.
- Push one cushion support wire inboard while pushing the TED outboard. Repeat for the other retainer.

3. Disengage the front retainers.





3. Rotate and remove the cushion TED.





Installation

1. Position the cushion TED to the seat.

2. Attach the cushion TED in the following sequence.

1. Engage the front retainers.

2. Engage the rear retainers.

3. Connect the electrical connector.

3. Install the seat. For additional information, refer to Seat - Front Seat - Front.