Seat Backrest Cover - Second Row, 40 Percent, Bench

Seat Backrest Cover - Second Row, 40 Percent, Bench

Removal and Installation

NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row Seat - Exploded View, Second Row.

1. Push the head restraint guide sleeve button in, lift up on and remove the head restraint assembly.

2. Release the backrest cover J-clips.





3. NOTICE: Use care when separating the seat backrest cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the seat backrest foam.

Release the hook-and-loop strips, invert the backrest cover and remove the 2 hog rings.

4. NOTE: The head restraint guide sleeves are not interchangeable.

Lift the backrest foam pad, squeeze the tabs in and remove the 2 head restraint guide sleeves.

5. Remove the backrest cover.

6. To install, reverse the removal procedure.