Sunroof / Moonroof Switch: Service and Repair

Roof Opening Panel Control Switch









Removal and Installation

1. Remove the overhead console. For additional information, refer to Instrument Panel and Console Console - Overhead.

2. Remove the light assembly from the overhead console.

1. Carefully insert a thin, flat-blade screwdriver and pull towards the light assembly while pushing with the screwdriver the 2 front tabs outward and rotating the light assembly slightly away from the overhead console.

2. Carefully pull the light assembly forward and unhook the 2 rear tabs and remove the light assembly from the overhead console.





3. Using a thin flat-blade screwdriver, pry the 4 tabs away from the switch and remove the switch from the light assembly.





4. Disengage the 2 tabs and remove the switch bezel from the switch.





5. To install, reverse the removal procedure.