Power Trunk / Liftgate Control Module: Service and Repair

Liftgate/Trunk Module (LTM)









Removal and Installation

1. Remove the LH quarter trim panel.

2. Disconnect the 2 Liftgate/Trunk Module (LTM) electrical connectors.

3. Remove the 2 LTM (Liftgate/Trunk Module) retaining bolts and remove the LTM (Liftgate/Trunk Module).
- To install, tighten to 7 Nm (62 lb-in).


4. To install, reverse the removal procedure.
- Initialize the power liftgate. For additional information, refer to Power Liftgate Initialization Programming and Relearning.