Audio Control Module (ACM)

Audio Control Module (ACM) - MKZ









Removal and Installation

NOTE: It is not necessary to remove the Audio Control Module (ACM) to retrieve the part number. For additional information, refer to Audio Control Module (ACM) Self-Diagnostic Mode Audio Control Module (ACM) Self-Diagnostic Mode.

1. NOTE: Module configuration is required when a new ACM is being installed.

Upload the ACM configuration information to the scan tool. For additional information, refer to Programmable Module Installation (PMI) in Module Configuration Programmable Module Installation (PMI).

2. Remove the Front Controls Interface Module (FCIM). For additional information, refer to Front Controls Interface Module (FCIM) - MKZ Front Controls Interface Module (FCIM).

3. Remove the 8 screws and the ACM.

4. To install, reverse the removal procedure.
- Download the ACM configuration information from the scan tool. For additional information, refer to PMI in Module Configuration Programmable Module Installation (PMI).