Operation CHARM: Car repair manuals for everyone.
Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)

Backup Lamp Switch: Service and Repair




Reversing Lamp Switch









Removal and Installation

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Jacking and Lifting Service and Repair.

2. Remove the fasteners and the lower engine splash shield.

3. NOTE: Discard the reversing lamp switch gasket.

Disconnect the electrical connector and remove the reversing lamp switch.

- To install, tighten to 24 Nm (18 lb-ft).

4. To install, reverse the removal procedure.
- Install a new reversing lamp switch gasket.

- Check the transmission fluid and fill as necessary. For additional information, refer to Manual Transaxle/Transmission Procedures.