Heated Seat Module - Second Row

Heated Seat Module - Second Row

NOTE: Bottom of floor console shown.











Removal and Installation

1. Remove the front floor console. For additional information, refer to Instrument Panel and Console Console - Front, Floor Console - Front, Floor.

2. Disconnect the 2 heated seat module electrical connectors at the bottom of the front floor console.

3. Remove the screw and unhook the heated seat module.

4. To install, reverse the removal procedure.

5. Carry out the auto-configuration sequence to program the heated seat module for use with a dual momentary switch.
- Start the vehicle and push the low button on either heated seat switch.

- Operate the heated seats, monitor the indicators and verify the system is operating correctly in high and low.