Seat Backrest - Second Row, 40 Percent

Seat Backrest - Second Row, 40 Percent

Disassembly

NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row Seat - Exploded View, Second Row.

1. Remove the seat backrest. For additional information, refer to Seat Backrest- Second Row, 40 Percent Seat Backrest - Second Row, 40 Percent.

2. Remove the head restraint guide sleeves. For additional information, refer to Head Restraint Guide Sleeve Head Restraint Guide Sleeve.

3. NOTICE: Use care when separating the backrest cover from the hook-and-loop strip, or the hook-and-loop strip may be torn from the backrest foam pad.

Separate the hook-and-loop strips, invert the backrest cover, remove the hog rings and the backrest cover.


4. If equipped, disconnect the backrest heater mat electrical connector.

5. Remove the backrest foam pad from the frame.

6. Separate the electrical connector pin-type retainer, remove the 3 screws, disengage from the hard back panel and remove the backrest Thermo-Electric Device (TED).





7. Disengage the cable retainer, drill the rivet out, disengage the retaining clips and remove the power lumbar.





8. Remove 2 screws, release the 4 pin-type retainers and remove the hard back panel.





9. To assemble, reverse the disassembly procedure.