Instrument Cluster Finish Panel

Instrument Cluster Finish Panel - MKZ

Removal and Installation

1. Release the 2 instrument cluster finish panel screws covers and remove the 2 instrument cluster finish panel screws.

2. Remove the steering wheel.

3. Remove the multifunction switch.

4. Remove the LH instrument panel finish panel.
- Pull the LH instrument panel finish panel toward the rear of the vehicle to release the retaining clips.


5. Remove the instrument cluster finish panel.
- Pull the instrument cluster finish panel toward the rear of the vehicle to release the retaining clips.


6. To install, reverse the removal procedure.
- If replacing the instrument cluster finish panel, remove the 2 register screws and transfer the register.

- Make sure to align the LH instrument panel finish panel retaining clips to the retaining clip holes in the instrument panel.