105000 MI or 168000 KM

Inspect
    Wheels
      Inspect the wheels and related components for abnormal noise, wear, looseness, or drag.
    Vehicle
      Recommended Multi-point Inspection
    Universal Joint, Drive/Propeller Shaft
      If equipped.
    Tie Rod End
      Inspect tie rod ends (lubricate if equipped with Zerk fittings)
    Steering and Suspension
      Inspect steering linkage, ball joints, suspension, tie-rod ends, driveshaft and U-joints; lubricate if equipped with grease fittings.
    Fluid - A/T
      Inspect automatic transmission fluid level (if equipped with an underhood dipstick).
    Exhaust System
      Inspect exhaust system and heat shields.
    Drive Belt
      Inspect accessory drive belt(s). Perform a follow-up inspection at 120,000 miles (192,000 km).
    Cooling System
      Inspect engine cooling systems concentration and hoses.
    Constant Velocity Joint Boot
      If equipped.
    Brakes and Traction Control
      Inspect brake pads, shoes, rotors, drums, brake lines and hoses and parking brake system.
    Ball Joint
      If equipped.
Replace
    Oil Filter, Engine
    Fluid - Differential
      Change rear axle fluid (Dana axles).
    Engine Oil
      Change engine oil and filter.
    Coolant
      Change engine coolant. Initial replacement at 105,000 miles (168,000 km) or 72 months; every 45,000 miles (72,000 km) or 36 months thereafter.
    Cabin Air Filter / Purifier
      Replace if equipped.
Rotate
    Tires
      Rotate tires, inspect for wear and measure tread depth.