Automatic Transmission Precaution

AUTOMATIC TRANSMISSION PRECAUTION

Note:
- The oil pan could contain small chips, shavings, and other particles which may be helpful in checking the condition of the transmission and diagnosing certain problems.
- To ensure that all foreign particles stay in the oil pan, make sure that the transmission is never tipped completely over while the oil pan is still installed.

1. Disassemble the transmission in a clean area (dustproof work space) to prevent entry of dust into the mechanisms.
2. Use only plastic hammers when applying force to separate the light alloy case joints.
3. Never use rags during disassembly; they may leave particles that can clog fluid passage.
4. Several parts resemble one another; arrange them so that they do not get mixed up.
5. Disassemble the control valve component and thoroughly clean it when the clutch or brake band has burned or when the ATF has degenerated.

^ Warning: Although the stand has a self -locking brake system, there is a possibility that the brake may not hold when the transmission is held in a lopsided position on the stand. This would cause the transmission to turn suddenly, causing serious injury. Never keep the transmission tilted to one side. Always hold the rotating handle firmly when turning the transmission.