Air Door: Service and Repair
AIR INLET DUCT DOOR REMOVAL/INSTALLATION1. Remove the plenum chamber.
2. Remove the screws from the air inlet duct door vacuum control motor and disconnect the vacuum hose.
Tightening Torque
2 - 3 N.m {20 - 30 kgf.cm, 18 - 26 in.lbf}.
3. Rotate the vacuum control motor up, disengage the lever and remove the vacuum control motor.
4. Remove the screws and remove the air inlet duct cover.
Tightening Torque
2 - 3 N.m {20 - 30 kgf.cm, 18 - 26 in.lbf}.
5. Remove the pin and remove the air inlet duct door.
1. Lubricate all hoses and fittings.
6. Install in reverse order of removal.