Antenna - Satellite Radio Removal/Installation
ANTENNA - SATELLITE RADIO REMOVAL/INSTALLATION
1. Remove the RH A-pillar trim panel. See - Locations.
2. Remove the RH sun visor.
3. Lower the front of the headliner enough to gain access to the satellite radio antenna electrical connector.
4. Remove the satellite radio antenna.
- Disconnect the electrical connector.
- Loosen the antenna bolt.
- To install, tighten to 5 Nm {0.5 kgf-m, 44 in-lbf}.
- Compress the tabs and release the satellite radio antenna from the roof panel.
5. To install, reverse the removal procedure.