Suspension - Excessive Negative Rear Camber

Bulletin No.: 007/93
Issued: 9/16/93
Revised:

Category
R

Applicable Model/s
1986-92 RX-7

Subject
REAR CAMBER ADJUSTMENT

APPLICABLE MODELS/VINS

RX-7

1986 - Vehicles with a VIN of JM1FC33*G0400001 through JM1FC33*G04999999

1987 - Vehicles with a VIN of JM1FC33*H0500001 through JM1FC33*H05999999

1988 - Vehicles with a VIN of JM1FC33*J0600001 through JM1 FC33*JO6999999

1989 - Vehicles with a VIN of JM1FC33*K0700001 through JM1 FC33*K07999999

1990 - Vehicles with a VIN of JM1FC33*L0800001 through JM1FC33*L08999999

1991 - Vehicles with a VIN of JM1FC33*M0900001 through JM1 FC33*M09999999

1992 - Vehicles with a VIN of JM1FC33*N0100001 through JM1FC33*N01999999

DESCRIPTION

Vehicles exhibiting excessive negative camber of the rear wheels may be corrected with a modified rear lower arm. Modified rear lower arms have been established as a service part to increase camber by 1 degree.

REPAIR PROCEDURES





Replace the rear lower arm according to the instructions in section R of the workshop manual.





PARTS INFORMATION

WARRANTY INFORMATION
(Applies to vehicles covered under normal warranty)

Type: A
Customer Comment Code: 87
Damage Code: 9E
Part Number Of Main Cause: FCY1 28 300 or FCY1 28 350
Operation Number: R0510ARX (one side), R0510BRX (both sides)
Labor Hour: 0.8 Hrs. (one side), 1.3 Hrs. (both sides)