Speedometer - Replacement Procedure

Bulletin No.: 003/97
Issued: 02/25/97
Revised

Category
AD

Applicable Model/s
All Models

Subject:
SPEEDOMETER REPLACEMENT PROCEDURE

DESCRIPTION

In accordance with Federal regulations, follow the procedures listed below when replacing a speedometer.





NOTE:
1. Mazda vehicles are manufactured with tamper-proof speedometers and the mileage can not be altered or adjusted.
2. When a speedometer is replaced, the new speedometer will read zero (0).
3. This procedure is extremely important to accurately represent actual vehicle mileage.
4. The "Speedometer Replacement Label" referenced below is available through the Mazda Program Center for a limited time. Mazda Motor of America, Inc. is providing 1 sheet of 20 labels with this bulletin (see Illustration).

REPLACEMENT PROCEDURE

1. Remove and replace the speedometer according to the workshop manual.

2. Complete the following information on the "Speedometer Replacement Label."

^ Mileage before speedometer replacement

^ Date of replacement

^ Dealer code.





3. Attach the label to the driver's side "B" pillar.

4. Complete the "Speedometer Replacement Record" in the Warranty Information Booklet as referenced.





DISCLAIMER