Flywheel or Drive Plate, Clutch Disc & Clutch Cover

1. Remove any old sealant from bolts and bolt holes. If old sealant cannot be removed from bolt, replace bolt.
2. Apply suitable sealant to bolt threads.
3. On models with manual transmission, install flywheel, torquing bolts, with suitable tool, to specification.
4. On models with automatic transmission, install and tighten drive plate adapter, drive plate and backing plate. Using suitable tool, torque bolts to specification.
5. Using suitable tools, install clutch disc and clutch cover on manual transmission models, torquing to specification.