Fluid - M/T: Service and Repair

1. Remove the two drain plugs ((A) and (B)) and two plugs ((C) and (D)), and drain the oil into a suitable container.
2. Wipe all plugs clean.
3. Apply sealant to the threads of plugs (C) and (D).
4. After the oil has drained, install drain plug (B) and plug (A) with a new washer.

NOTE: Apply transmission oil to a new washer.

Tightening torque:
A: 39 - 59 N.m (4.0 - 6.0 m-kg, 29 - 43 ft-lb)
B: 25 - 39 N.m (2.5 - 4.0 m-kg, 18 - 29 ft-lb)

5. Add oil from the (C) filler plug port until the level reaches the bottom of the (D) check plug hole.
6. Install plugs (C) and (D).

Tightening torque: 25 - 39 N.m (2.5 - 4.0 m-kg, 18 - 29 ft-lb)