Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Adjustments

Inhibitor Switch Adjustment:

1. Turn manual shaft to "N" position.
2. Loosen switch mounting bolts.
3. Align holes of inhibitor switch and manual shaft lever by inserting a pin of approximately 2.0 mm (0.079 in) OD.
4. Torque mounting bolts to 8 - 11 Nm (69 - 95 in lb).
5. Recheck continuity across connector terminals. If not correct, replace switch.
6. Install selector lever and torque to 44 - 64 Nm (33 - 47 ft lb).