Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1992 >> 626 L4-2184cc 2.2L SOHC F2 >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Transmission Position Sensor/Switch >> Adjustments
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Adjustments

Inhibitor Switch Adjustment:






1. Set manual shaft to "N" position.
2. Loosen switch mounting bolts.
3. Remove screw and move switch so that small hole is aligned with screw hole.
4. Set alignment by inserting a 0.079 in (2.0mm) diameter pin through holes.
5. Tighten switch mounting bolts to 69 - 95 in lb (8 - 11 Nm).
6. Remove pin, install screw and tighten to 3.5 - 6.0 in lb (0.4 - 0.7 Nm).
7. Recheck continuity between terminals.
8. If not as specified, replace switch.
pro multis · About Operation CHARM