Control Assembly: Adjustments

Temperature Blend Wire





1 Set temperature control lever at MAX-COLD position.
2. Connect and clamp the wire with the shutter lever on the heater unit all the way to the right side.

Caution: Move the temperature control lever to be sure the wire is attached. Also, be sure it can move the full stroke between HOT and COLD.


Airflow Mode Wire





1. Set mode control lever to DEF position.
2. Connect and clamp the wire with the shutter lever on the heater unit at its closest point.

Caution: Move the mode lever to be sure the wire is attached. Also, be sure it can move the full stroke between DEF and VENT.


REC-FRESH Selector Wire





1. Set the selector lever to REC position.
2. Connect and clamp the wire with the shutter lever on the blower unit at its closest point.

Caution: Move the Rec-Fresh lever to be sure the wire is attached. Also, be sure it can move the full stroke between REC and FRESH.