Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1992 >> Navajo 2WD V6-4.0L OHV >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair

Variable Reluctance (Crankshaft Position) Sensor:






REMOVAL:

1. Disconnect the negative battery cable.
2. Disconnect the sensor electrical connector from the wiring harness.
3. Remove the sensor mounting bolts and remove the sensor.


INSTALLATION:

1. Position the sensor assembly on the engine.
2. Install the two sensor attaching bolts and tighten to 80-106 lb. in. (9-12 N-m).
3. Route the sensor wiring harness and connect the electrical connector to the sensor.
4. Connect the negative battery cable.
pro multis · About Operation CHARM