Crankshaft, Engine

Main Bearing Journal:
Diameter 63.983 - 64.003 mm (2.5190 - 2.5198 inch)
Out Of Round Limit 0.008 mm (0.0003 inch)
Taper Limit:
0.06 mm (0.0006 inch) Total
0.013 mm (0.0003 inch) Per 25 mm (1 inch)
Journal Runout Limit 0.05 mm (0.002 inch)
Surface Finish (RMS) 0.25 Micrometers (10.0 Micro inch)
Thrust Bearing Journal:
Length 25.775 - 25.825 mm (1.0148 - 1.067 inch)
Connecting Rod Journal:
Diameter 53.983 - 54.003 mm (2.1253 - 2.1261 inch)
Out-Of-Round Limit 0.006 mm (0.0003 inch) Maximum
Taper Limit:
0.0150 mm (0.0006 inch) Total
0.008 mm per 25 mm (0.0003 inch per inch)
Surface Limit (RMS) 0.25 Micrometers (10.0 Micro inch)
Main Bearing Thrust Face:
Surface Finish (RMS):
Front and Rear 0.4 Micrometers (0.157 Micro inch)
Runout Limit 0.025 mm (0.001 inch)
Crankshaft End Play 0.10 - 0.20 mm (0.004 - 0.008 inch)