Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 1994 >> B4000 2WD V6-4.0L OHV >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Crankshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Crankshaft Position Sensor: Service and Repair

View: Component Location:





REMOVAL
1. Disconnect the negative battery cable.
2. Disconnect the sensor electrical connector from the wiring harness.
3. Remove the sensor mounting bolts and remove the sensor.


INSTALLATION
1. Position the sensor assembly on the engine.
2. Install the two sensor attaching bolts and tighten to 10-11 Nm (81-105 in.lb.).
3. Route the sensor wiring harness and connect the electrical connector to the sensor.
4. Connect the negative battery cable.
pro multis · About Operation CHARM